Free Microsoft MB-330 Dumps [2020.5] – Latest MB-330 Questions

If you are brave enough to take the Microsoft MB-330 exam challenge, then the MB-330 dumps should be seriously considered. If you want to hear my opinion, then I will recommend Pass4itsure MB-330 exam dumps pdf. https://www.pass4itsure.com/mb-330.html So let’s learn some information about MB-330 exam dumps.

[PDF] Microsoft MB-330 Exam Questions PDF:

https://drive.google.com/open?id=1QGuBJyz7cqtyfDYgkU4g-s1Rya8XM1fj

Microsoft MB-310 Exam Actual Questions [2020] For Free

Points to note when preparing MB-330 exam questions:

You will have to do some research and start preparing MB-330 exam dumps.

Requires attention:

  1. Is it updated frequently?
  2. Is it actually written by a Microsoft expert?
  3. Is the price reasonable?

Pass4itsure | Best MB-330 Dumps PDF Dumps:

Pass4itsure is famous for the well-regarded Microsoft MB-330 PDF dump. These problems Dynamics 365 Supply Chain Management Functional Consultant Associate are solved by Microsoft experts. These high-quality MB-330 example questions have always been regarded as the most effective way to successfully obtain the MB-330 test.

If you are willing to practice the Microsoft MB-330 exam, the answer to this Pass4itsure MB-330 exam question will prove to be the best for you.

MB-330 Exam Passing Guarantee 100% and 24/7 Customer Care Service:

When preparing questions for the MB-330 exam, there are always fears that the MB-330 exam will fail. However, with Pass4itsure Microsoft MB-330 training materials, you can get a 100% pass guarantee. With Microsoft MB-330 dumps pdf questions, you can also get 24/7 customer service, and free 365-day updates for all Microsoft exams.

Pass4itsure discount code 2020

Pass4itsure-discount-code-2020

Please read the picture carefully to get 12% off!

Microsoft MB-330 Practice Exam question 1-13

QUESTION 1
You are the materials manager at a distribution company.
You are responsible for setting up the ABC classification of all items as follows:
1.
Class A materials represent 70 percent of the material value.
2.
Class B materials represent 20 percent of the material value.
3.
Class C materials represent 10 percent of the material value but are the most commonly used.
You need to assign an ABC classification value model to all items using those values.
What should you do?
A. Run the ABC classification report
B. Run the ABC classification periodic task to update the value model for all items
C. Manually update the Value classification on the Released product record
D. Run the ABC classification periodic task to update the revenue model for all items
Correct Answer: B

QUESTION 2
You are the product manager at a distribution company. You are responsible for managing product compliance
standards and reporting.
Chemical product, C0001 can be sold in all parts of the United States except for the state of California.
You need to set up these compliance requirements for C0001.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to
the answer area and arrange them in the correct order.
Select and Place:

Bsabio MB-330 exam questions-q2

QUESTION 3
Inventory in a warehouse is assigned to an inventory status of available.
You need to set up an inventory status for damaged items so that they are not sold to customers.
Which values should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Bsabio MB-330 exam questions-q3

QUESTION 4
HOTSPOT
A company plans to stock new items and value those items by using FIFO principle. The company has multiple sites set
up. There are multiple warehouses for each site.
You must be able to view the value and quantity of these items at each warehouse.
You need to apply FIFO costing per warehouse.
How should you complete the costing setup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

Bsabio MB-330 exam questions-q4

Correct Answer:

Bsabio MB-330 exam questions-q4-2

QUESTION 5
A company is implementing sales order functionality in Dynamics 365 for Finance and Operations.
The company has a business requirement to fulfill sales orders by using direct delivery.
You need to enter a direct delivery sales order so that a purchase order is automatically created.
What should you do after you enter the sales order and lines?
A. Set the ship complete toggle to On and confirm the order on the sales order header.
B. Select automatic and confirm the sales order on the line level setup tab in the reservation field.
C. Change the customer\\’s address to the vendor\\’s direct delivery address and confirm the sales order.
D. Select the direct delivery option under the sales order action pane and complete the form.
Correct Answer: D

QUESTION 6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
A company plans to simplify interactions between purchasing department employees and vendors.
You need to ensure that employees are redirected to a vendor\\’s online store to select items for inclusion on purchase
requisitions.
Solution: Create a retail product catalog.
Does the solution meet the goal?
A. Yes
B. No
Correct Answer: B
References: https://docs.microsoft.com/en-us/dynamics365/supply-chain/procurement/set-up-external-catalog-forpunchout

QUESTION 7
An employee at a company needs to lay out the various component builds for bicycles.
You need to identify which constraints the employee should use to set up the bicycles.
Which two types of constraints achieve the goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. table constraints that are used generically among product configuration models
B. expression constraints that are used generically among product configuration models
C. expression constraints that are unique to each product configuration model
D. table constraints that are always unique to each product configuration model
Correct Answer: AC
References: https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/pim/expression-constraintstable-constraints-product-configuration-models

QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound
transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Select the full blocking option in the item sampling page.
Does the solution meet the goal?
A. Yes
B. No
Correct Answer: B
References: https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/inventory/inventoryblocking

QUESTION 9
A company uses Dynamics 365 Supply Chain Management.
A customer returns a product that is defective for a replacement.
You need to process the return order.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Create a return of type Credit Only
B. Set the deadline date according to the company policy
C. Create a credit note for the replaced product
D. Set the delivery address to the customer\\’s address in the return order
E. Create a return of type Physical Return
F. Set the deadline date to the date the customer returns the defective product
G. Set the delivery address to the company warehouse in the return order
Correct Answer: BEG

QUESTION 10
You need to implement location directives in Dynamics 365 for Finance and Operations.
Which objects should you use? To answer, drag the appropriate objects to the correct permissions. Each object may be
used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Bsabio MB-330 exam questions-q10

QUESTION 11
A company uses Dynamics 365 Finance.
The finance department processes royalty claims using the accounts payable module.
You need to pass the claims to the accounts payable group for payment.
Which three events will occur? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. A Royalty accrual journal posting reverses the previous interim postings for accrual and expense amounts.
B. A credit is posted to the vendor\\’s payable account.
C. A vendor invoice for the royalty payment is set to draft.
D. A new vendor invoice for the royalty is created and posted.
E. A hold is put on the amounts held in the royalty fees account.
Correct Answer: ABD
References: https://docs.microsoft.com/en-us/dynamics365/finance/accounts-payable/royalty-contract

QUESTION 12
A company plans to use warehouse management and dock appointment scheduling in Dynamics 365 for Finance and
Operations.
You need to configure the system.
Which configuration options should you use? To answer, drag the appropriate configuration options to the correct
requirements. Each configuration option may be used once, more than once, or not at all. You may need to drag the
split bar
between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Bsabio MB-330 exam questions-q12

Correct Answer

Bsabio MB-330 exam questions-q12-2

QUESTION 13
A company manufactures wood furniture.
Cabinets can be purchased with different wood finishes including oak and maple.
You need to configure a product attribute to characterize the types of cabinet finishes.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
to the answer area and arrange them in the correct order.
Select and Place:

Bsabio MB-330 exam questions-q13 Correct Answer:

Bsabio MB-330 exam questions-q13 Bsabio MB-330 exam questions-q13-2

References: https://docs.microsoft.com/en-us/dynamics365/unified-operations/retail/attribute-attributegroups-lifecycle

Microsoft MB-330 Exam Video

Multiple learning methods, videos are more intuitive, and the latest MB-330 exam questions are shared with you.

Summarize:

The most efficient and reliable Microsoft MB-330 practice exam shared above.Pass4itsure Microsoft MB-330 exam question answer pdf can help millions of people prepare and prove their skills when trying to implement the “Microsoft Dynamics 365 Supply Chain Management” exam. https://www.pass4itsure.com/mb-330.html
Join now to get more of the most reliable Microsoft MB-330 exam dumps materials.

[PDF] Free Microsoft MB-330 Exam Questions PDF:

https://drive.google.com/open?id=1QGuBJyz7cqtyfDYgkU4g-s1Rya8XM1fj

  •  
  •  
  •  
  •  
  •